<
>
CNMG-PL1
CNMG-PL1
☑ Dual front angle design enables light cutting across a wide range of cutting conditions
☑ Wide flank design meets the high strength demands of cutting edges for steel machining
☑ Gradual chipbreaker protrusions enhance chip breaking capability under low cutting forces
Product Custom Attributes
Product Description
| Model | r | IC | S | d | L |
| CNMG090304-PL1 | 0.4 | 9.525 | 3.18 | 3.81 | 9.7 |
| CNMG090308-PL1 | 0.8 | 9.525 | 3.18 | 3.81 | 9.7 |
| CNMG120404-PL1 | 0.4 | 12.7 | 4.76 | 5.16 | 12.9 |
| CNMG120408-PL1 | 0.8 | 12.7 | 4.76 | 5.16 | 12.9 |
| CNMG120412-PL1 | 1.2 | 12.7 | 4.76 | 5.16 | 12.9 |
| CNMG160612-PL1 | 1.2 | 15.875 | 6.35 | 6.35 | 16.1 |
| CNMG190608-PL1 | 0.8 | 19.05 | 6.35 | 7.93 | 19.3 |
| CNMG190612-PL1 | 1.2 | 19.05 | 6.35 | 7.93 | 19.3 |
| 牌号 | BPC210 |
| BPC220 |
Related Products
-
TRS5R-50-22-4T
TRS Rouhd Dowel Face Mill
-
RAP
RAP-75° Face Mill
-
EMRW6R-50-22-4T
EMRW Rouhd Dowel Face Mill
-
EMR5R-50-22-4T
EMR Rouhd Dowel Face Mill
-
BAP
BAP Right Angle Shoulder Face Mill
-
BGS-4F
4 Flutes , Corner Radius End Mill for Graphite General Machining BGS-4F
-
BGB-2FN
4 Flutes , Corner Radius End Mill for Graphite General Machining BGR-2FN
-
HBPGS-4F
4 Flutes, Square End Mill for Steel High Efficiency Machining HBPGS-4F
